Water Wells

Texco Drilling Ltd specialise in:

  • 150mm and 200mm wells to 150 meters
  • 250mm and 300mm wells to 60 meters
  • Large diameter wells up to 1.2 diameter for efficient shallow wells
  • Galleries also installed with excavators up to 35 ton available.
  • Environmentally friendly products are used in all situations where equipment engages or enters the ground (thread grease etc.)

Known quality when Texco Drilling Ltd install your new well:

  • ISO 9001:2008 Quality Assurance Certification
  • Down-hole video at the end of each well job with copy of footage to client (free service). Part of Quality Assurance
  • Experienced and trained operators
  • Casing joining undertaken by 4711 Qualified Welders using formal weld procedures
 
Well Development:

We pride ourselves in leaving your well correctly screened with quality stainless steel wedge wire screens of the correct diameter and aperture size and developed to its full potential (casing installation is only the first step and often the easiest). Correct and full development has a positive impact on pump selection, protects your pump investment, and maximises the overall long-term economics of the well and pump installation.

There is no need to put up with a sub-standard result.

Each well is unique and may require a different approach to reach its full potential. Texco use mechanical, air, and chemical development methods depending on what is required in each situation.

Inspection, rehabilitation and repair of existing wells:

With our comprehensive range of equipment and high resolution Down Hole Video Camera we can inspect and recommend further action on your existing well or indeed recognise when it has reached the end of its economic life so you can spend money wisely.

Well repair system:

We also have a well repair system available to give you a viable option to fix a broken or non-complying well, rather than drilling a new one.

Test Pumping:

This can be undertaken with measurements taken by Orifice Weir, V Notch Weir or electronic flow meter with data loggers and down hole measuring done by electronic pressure transducers.

We have our own diesel generator if power is not available on site.

Please phone Bert Buunk 027 224 5058 for more information.